CA100IS: Isolation Sleeve

CA100IS: Isolation Sleeve

SAF-T-BAR
(Code: IPC0400282)
In Stock
CA100IS: Isolation Sleeve
CA100IS: Isolation Sleeve

The Isolation sleeve is used to electrically isolate adjacent conductor sections with a 1/2” over surface gap. The sleeve will support adjacent conductor sections but must have hangers within 6” on each side of the isolation sleeve. Collectors bridge the gap electrically. Two sleeves separated by 6” of conductor are required to prevent collectors from bridging the gap as in signal or control functions.


series-c-saf-t-bar-c102x2066935
US$ 19.10
0g